This page:


Changing the oil and filter on a Giulietta multi air

Changing the oil on a Giulietta Multi air

These are the tools you will require to complete this task

Remove top cover of engine

The oil filter housing is circled in red in this picture

Undo filter housing using a 27mm socket ratchet and long extension

Remove filter and seal from housing off the vehicle in a clean environment

Fit new seal and clip in new oil filter and refit using the reverse of the above procedure

To change the oil first take off the oil filler cap and put it on the front panel so you cant close the bonnet without putting it back on the car, then remove the undertray

Undo the sump plug

Drain the oil into a suitable container and dispose of carefully

Replace sump plug washer

If you are an existing online parts customer of ours, you can get

Related Links: Alfa Romeo Giulietta Parts | Alfa Mito, Giulietta Servicing Costs

Contact Us | General Interest | Alfa Insurance| New Alfa Romeos | Club Corner | Terms & Conditions | © Jamie Porter Ltd