This page:

Changing the oil and filter on a 156, 147 or GT Mjet

How to change the oil and oil filter on a 156, 147 or GT

First job is to remove the oil cap, don't put it back on until after you have filled the car with oil and put it somewhere obvious

Jack the car up and make it safe with axle stands and then remove the under tray.

Drain the oil and dispose of it carefully.

Remove oil filter cover which is on the front of the engine next to the exhaust particulate filter.

Remove oil filter and replace with new, making sure you put a smear of oil on the seal and then do it up as tight as you can by hand, do not use a tool to tighten this up.

Replace sump plug washer.

If you are an existing online parts customer of ours, you can get

Related Links: Fixed Price Servicing | Alfa Romeo 156 Parts | | Alfa Romeo GT Parts

Contact Us | General Interest | Alfa Insurance| New Alfa Romeos | Club Corner | Terms & Conditions | © Jamie Porter Ltd