This page:
Replacing The Standard 4C Paddles With Our Extended Carbon Fibre Shifters
The Alfaworkshop carbon paddle shifters are longer than standard, look sweet, have a distinctive positive feel on gearchange due to a magnetic contact and comes in four styles.
(For this how to guide we had to take pictures through the windscreen so apologies)
If you would like to purchase a set we will fit them for free at the Alfaworkshop £369.00
 | Each paddle is held on with one T20 screw at the back. |
|
 | Undo the screw on the right side paddle. |
|
 | As the paddle comes off, carefully extract the wiring loom from the housing so that the connector is exposed. |
|
 | Unplug the connector. |
|
 | On the carbon paddles route the wiring harness around the tabs as in the picture. |
|
 | Plug in the connector, do up the screw then proceed to the left hand paddle. |
|
 | STYLE 1 |
|
 | STYLE 2 |
|
 | STYLE 3 |
|
 | STYLE 4 |
|