COVID-19 Message Updated: 1st Oct
Mail Order Customers:
Our carrier DHL is operating near normally across the world with its Air Express service. Allow an extra day for delivery (4 days for Australia and New Zealand), just in case.
  * For the UK only, Royal Mail are delivering the vast majority of orders on time according to our data, but is experiencing higher levels of staff absences, so there may some local delays.
  * We will be working normally and have a large warehouse full of parts that will help keep your car on the road. However, we are seeing some supply delays from factory lockdowns around the world.
Workshop Customers:
We have strict social distancing processes internally and disinfect daily (not least because we have staff in vulnerable groups). In the circumstances, we have had to close our waiting room. Our mechanics wear gloves at all times and we will disinfect your vehicle with our Zaflora sprays on handing back to you. We would respectfully ask you to show our staff the same courtesy. We also have full amount contactless payment systems.
  * In these times of fluctuating demand, it's highly advisable to book your vehicle in earlier than usual. We are currently very busy indeed.

This page:

How to replace the crankshaft sensor on an Alfa romeo TS or JTS engine

How to replace a crank shaft sensor on an Alfa GT, GTV, Spider, 147, 156 Twin spark or JTS engine.


Remove the engine top cover for ease of access and then disconnect brown plug on the rear of the inlet manifold.


Unclip the wire from manifold.


Unclip the wire from manifold support bracket.


Undo the allen key that retains the sensor just below the starter motor and remove shaft sensor.


Fit new crankshaft sensor using the reverse of the procedure detailed above.

border='1'If you are an existing online parts customer of ours, you can get

Related Links: Alfa Romeo Parts | 147/156/GTV Service Schedule

Contact Us | General Interest | Alfa Insurance| New Alfa Romeos | Club Corner | Terms & Conditions | © Jamie Porter Ltd