COVID-19 Coronavirus Message Updated: 17th September
Mail Order Customers:
  *
Our carrier DHL is operating near normally across the world. Allow an extra day for delivery (2 days for Australia, 6 days for New Zealand), just in case. However, regular international postal services can have additional delays, and are not recommended for anything required within 6 weeks.
  * For the UK only, Royal Mail are delivering the vast majority of orders on time according to our data, but is experiencing higher levels of staff absences, so there may some local delays.
  * We will be working normally and have a large warehouse full of parts that will help keep your car on the road. However, we are beginning to see supply delays from factory lockdowns around the world.
Workshop Customers:
  *
Following government guidance, we are open as usual. Taking your vehicle to a garage for repairs is a permitted activity (safety) as long as you observe the social distancing rules. We have strict social distancing processes internally and disinfect daily (not least because we have staff in vulnerable groups). In the circumstances, we have had to close our waiting room. Our mechanics wear gloves at all times and we will disinfect your vehicle with our Zaflora sprays on handing back to you. We would respectfully ask you to show our staff the same courtesy. We also have full amount contactless payment systems.
  * MOTs due for renewal from 30th March to 31st July will be extended for six months. However, you are still legally obliged to keep your vehicle in a safe and roadworthy condition, so if you need to use your car in this period, it is still strongly recommended to get one done.







This page:

Giulietta fuel filter

Changing the fuel filter on a Giulietta

:alt

The fuel filter is located under the bonnet by the left wing infront of the coolant tank

:alt

Disconnect the inlet pipe on top by pushing the white button in and pulling the pipe upwards. The outlet pipe is done by sqeezing in the green buttons on the side.

:alt

Unbolt the retaining bracket with a 10mm socket

:alt

Remove the bottom plug

:alt

Unscrew the bottom sending unit over a suitable container and leave the filter to drain.

:alt

Remove the old seal from the sending unit (as the new filter comes supplied with one fitted) and screw it into the new filter making sure not to over tighten it. Reverse the process for fitting.

If you are an existing online parts customer of ours, you can get
Contact Us | General Interest | Alfa Insurance| New Alfa Romeos | Club Corner | Terms & Conditions | © Jamie Porter Ltd